Specifications include, but are not limited to: Unless otherwise noted all work shall be completed according to the 2025 MLB Spec Book. Utilize provided sheet for product finish and color selections. Exterior: 1. Demo and replace all damaged; or supply and install any missing siding, channel, louvered vents and accessories. All new shall match existing. 2. Remove and dispose of cable wires secured around the exterior of the house. Caulk holes in the siding after removal with color matching caulk. 3. Remove and dispose of satellite dish(es). Caulk screw holes or repair any damage to the roof or siding. 4. Demo and replace all damaged; or supply and install any missing aluminum soffit and fascia covering. All new pieces to match existing. 5. Remove all existing shutters. Supply and install new Musket Brown shutters on the front elevation only. 6. Dig down to access the front left section of foundation wall which is badly cracked. Remove at least 2 blocks on either side of the crack for its full depth. Create an ICF-like form and pour the removed section of basement wall. Include #4 rebar reinforcement throughout and be doweled into the foundation block on either side of the in-fill. Provide waterproofing of the exposed section of foundation before backfilling after the concrete has properly dried. 7. Supply and install top soil and black dirt to repair grade around the perimeter of the home, mostly in the rear of the house. 8. Tear-off and replace existing house roofing. Include ice & water installation, replacement of underlayment, drip edge, valley metal flashings, roof jacks, bath fan exhaust covers, ridge vent / attic exhaust vents, step flashings and any other accessories which may be present. Color selection: Shakewood. 9. Demo all existing windows and replace with Spec Thermotech vinyl casement windows that meet egress requirements. Adjust siding to fit new windows. Install j-channel and 2” brown brick mould and caulk around perimeter. Windows to be Sandlewood. 10. Supply and install all new window screens.
