Specifications include, but are not limited to:Two (2) of each: Hydraulic System, Underbody Scraper & 14” 201 Stainless Steel Dump Box Installed and Complete. Shall be a combination Fuel & Hydraulic tank with 110-gallon fuel & 40-gallon hydraulic, with 3” NPT port for 2”suction strainer in bottom of hydraulic tank and flange in top to except a Zinga Model RF1215S-1 return filter housing with breather cap and fill screen, installed in conjunction with DPF/SCR exhaust system. Solid state fuel sending unit and guarded hydraulic oil sight/ temperature gauge, Fuel tank will have a water sump and petcock type drain, and ball type shut off valves on supply & return. The fuel tank vent shall conform to engine manufactures specifications. Unit shall be mounted on four (4) rubber bushing type mounting points. Hydraulic oil, low-level sensor* with in-cab light & alarm integrated with an electric solenoid shut-off valve at main hydraulic pump outlet, with dash mounted over-ride switches for low-level alarm & pump shut-off. *low oil sensor will be a solid state non¬ float type sensor, mounted in top of oil tank. Fuel & Hydraulic Tanks shall be of 7ga. Stainless Steel construction.