Specifications include, but are not limited to: MSP Tactical Bike Team Short Sleeve Shirt Shirts shall be manufactured by Bratwear based on the specifications listed below: Basic Material: Bratwear Short Sleeve, 100% Polyester, Moisture Management Knit with Stain and Velcro resistant finish. Color to match current MSP Trooper Uniform shirts (Raeford fabric by Burlington Industries, color 571-604). Awarded bidder will be required to provide one sample of the shirt in the proposed color to MSP, free of charge, for MSP’s approval, before starting production to fulfill the order requirements. Style: Military style shirt with military stitched creases, 3 on back and 2 on front. Form fitting cut with doubled 5” deep straight back yoke Trimmings: Collars: Collar point at front: 3” with collar approximately 1 ¾” high at back with opening at front to be ¾” to accommodate ready-tied tie Buttons: Buttons on front, top two and functional. Center front zipper, YKK #3 Vislon (tooth). Full length left facing forming an under placket on right side. Plastic 4-hole 24 ligne black buttons Shoulder Epaulets: Made of 2-ply dark navy. Top is “self” fabric and “under” epaulet is New York blue 100% nylon. Epaulets to finish 1 ½” from edge to collar. Cross-stitched at shoulder end. Strap to be 2” wide at both ends of straps with non-functioning button and button hole on collar end.