Specifications include, but are not limited to: 1. Pulverize existing asphalt to limits designated by the owner. 2. Excavate the concrete collar around the structure, inspect the structure, and re-seal as necessary. Replace existing concrete with a 6” gravel base and 3” HMA paving. 3. Re-grade and compact pulverized base with a minimum 1% drainage plan. Remove any excess pulverized materials as needed. 4. Place new asphalt per the existing layout in two lifts as follows: 1. Leveling course – Tier 1 4EL with PG 58-28 oil and 3% air voids at 165#/syd. 2. Wearing course – Tier 1 5EL with PG 58-28 oil and 3% air voids at 165# / syd. 5. Provide pavement markings per the existing layout and color. 6. The contractor is to provide any required layout/staking. 7. The project to be completed according to MDOT 2020 specifications. 8. The owner may retain 3 rd party inspection and/or perform material sampling/testing as necessary. 9. Owners reserve the right to accept or reject any bids at their sole discretion.