Specifications include, but are not limited to: Review the status of the equipment and components with the customer for any anomalies. Complete the monthly portion of the State of Michigan required boiler CSD-1 testing and documentation. Check operation and condition of burner linkage and air damper assembly. Test boiler feed water system for proper operation. Inspect boiler room’s outdoor combustion air intake for any obstructions and sufficiency. Spot check burner combustion. Perform a blow down of the boiler’s low water cut offs and bottom blow down valve to clear any accumulation of impurities. Inspect electrical termination points, contactors, and wiring in equipment panels. Review the boiler water treatment program log documentation for routine maintenance. Provide facility management with a written report of each unit’s operation and test results including any noted deficiencies. Reports shall include recommendations for corrections.