Specifications include, but are not limited to: A. Cabling and communications infrastructure. 1. The communications portion of the project encompasses communications cabling and termination equipment. The work shall include but not be limited to: a. Communications room racks and cabinets.; b. Communications Cabling and Termination Equipment: a. User UTP Plenum rated CAT-6 cabling; 2. All cables shall be labeled according to the drawings and the specifications.; 3. All cables shall be terminated and tested as per the specifications.; 4. Contractor shall provide personnel and equipment for full training and commissioning of the system.; 2. All cables shall be supported by J-hooks or cable tray/ladder.; 3. Label all cables; 4. Test all cables.; 5. The extent of the work shall be as shown on the drawing and detailed in these specifications; B. Post installation documentation 1. Each contractor shall provide post installation documentation as per the specifications.; Shall include but not be limited to: a. Red-lined as-built drawings; b. As-built detailed connectivity of AV and Network Systems; c. As-built cable locations and cable labels at each location.; d. Mark all splice locations; e. Update of all access control locations and equipment at each door; f. Camera locations and camera numbers.; g. Spreadsheet (hard copy and Excel file) for all network, Wireless, telephones and cameras detailing: A) Mfg. Part number; B) IP Address
