Specifications include, but are not limited to: Bid Item #1 – Carabiners Kong Guide Bent Gate Aluminum carabiner with minimum of 30kN MBS on the main axis; bent, non-locking gate to facilitate one handed operation, or approved equivalent. Anticipated order quantity: 181 Bid Item #2 – Head End High Angle Litter Bridle. Head end stokes litter lifting bridle of kernmantle construction, 7mm diameter, with an MBS of not less than 17 kN and 68” in length. Item should be constructed as a purcell prusik with a sewn connection as adjustability is imperative for operation, or approved equivalent.. Anticipated order quantity: 3 Bid Item #3 – Foot End High Angle Litter Bridle Foot end stokes litter lifting bridle of kernmantle construction, 7mm diameter, with an MBS of not less than 17 kN and 34” in length. Item should be constructed as a purcell prusik with a sewn connection as adjustability is imperative for operation, or approved equivalent. Anticipated order quantity: 3 Bid Item #4 - High Strength Guy Line Sterling 5.9MM PowerCord. Small diameter (less than 6mm,) High strength cordage. Constructed with a Technora core for high strength and low stretch. High visibility color (orange) and not less than 19.7 kN MBS or approved equivalent. Anticipated order quantity: 4 Bid Item #5 - Descender Petzl I’d L descender, NFPA 1983 G rated, or approved equivalent. Anticipated order quantity: 3 Bid Item #6 - Double Pulleys Rock Exotica Onmi Block 2.0 Double Pulley, MBS of 40kN min, prussic minding with integrated swivel and moveable, locking side plates, or approved equivalent. Anticipated order quantity: 6 Bid Item #7 - Webbing Spool (300’ min) of 1” tubular webbing with an MBS not less than 4000 LBS from a recognized rope rescue equipment manufacturer. 3 different colors for length standardization across the agency, or approved equivalent. Anticipated order quantity: 3 Bid Item #8 - AZORP Kit Double flange rigging pod for use with the Arizona VORTEX, that the agency currently owns and uses. Kit should have the rigging pods, extended connection pins, and storage bag, or approved equivalent. Anticipated order quantity: 1 Bid Item #9 - CMC AZ Bound Loop Prusik, Long Sewn termination prusik loop constructed of 8MM cord for compatibility with the .5” life safety rope currently in use. Item will be 25 inches and have an MBS of not less than 20 kN. Item should have a clear shrink tubing covering over the terminating ends to facilitate inspection and loop size adjustment, or approved equivalent. Anticipated order quantity: 10 Bid Item #10 - CMC AZ Bound Loop Prusik, Short Sewn termination prusik loop constructed of 8MM cord for compatibility with the .5” life safety rope currently in use. Item will be 18 inches and have an MBS of not less than 20 kN. Item should have a clear shrink tubing covering over the terminating ends to facilitate inspection and loop size adjustment, or approved equivalent. To be used in conjunction with long loop prusik above. Anticipated order quantity: 10
