Specifications include, but are not limited to: Furnish and install sheet roofing system, including: 1. Roofing manufacturer's requirements for the specified warranty. 2. Removal of entire existing roof membrane system including insulation and flashings down to existing structural deck. Verify existing roofing system to be remodeled at site with applicable core. 3. Removal of all existing insulation down to the deck. 4. Removal of existing loose roofing aggregate. 5. Preparation of roofing substrates. 6. Wood nailers for roofing attachment-refer to drawing details. 7. New insulation base course (flat) mechanically attached to roof deck through existing insulation; subsequent layers (tapered) and cover board, adhered in foam adhesive. 8. Fully adhered 60 mil Type I non-reinforced EPDM Elastomeric membrane roofing. 9. Metal roof edging and copings to meet IBC code for ANSI/SPRI ES-1.. 10. Flashings, penetrations, and equipment.
