Specifications include, but are not limited to: The general description of the Scope of Work (SOW) for this project is to provide the District with a complete Security Camera and Access Control System at five (5) building locations. The awarded Bidder shall: 4.3.1 Meet jointly with representatives of the District to exchange information and agree on details of equipment arrangements and installation interfaces for a Security Camera and Access Control System project. 4.3.2 Have sufficient resources in order to complete the SOW within the allotted timeframe and shall, upon request, demonstrate that they have the resources necessary to complete the SOW within the specified timeframe. 4.3.3 Furnish all labor, supervision, tooling, and miscellaneous mounting hardware and consumables for the Security Camera and Access Control System installed at the District. 4.3.4 Abate any existing cable in each building, where applicable, and will properly dispose of such cable at the Bidder’s expense. 4.3.5 Install all cable in accordance with the Product and Services Specifications and/or manufacturer’s recommendations and best industry practices. 4.3.6 Develop and submit for approval a labeling system for the cable installation. At a minimum, the labeling system shall clearly identify all components of the system; cameras, racks, cables, panels, and outlets. 4.3.7 Install a fire stop system in accordance with the specifications and/or manufacturer’s recommendations which shall be completely installed and available for inspection by the local inspection authorities prior to cabling system acceptance. 4.3.8 Test (100%) all hardware for defects in installation and to verify performance under installed conditions. 4.3.9 Provide installation, administration, testing, and “As-Built” documentation required from and/or maintained by the selected vendor/contractor during the course of the entire network electronic installation project. 4.3.10 Provide a written guarantee/warranty covering the installed Security Camera and Access Control System against defects in workmanship, components, and performance, and follow-on support after project completion for a period of five (5) years.
