Bus Stop Signs – Type A • 12” x 24” pre-stenciled • 0.080” thick aluminum substrate • Rounded corners, 1.5” radius • Two (2) mounting holes per sign blank. Holes must accept 5/16” threaded screws after trimming. Holes shall be centered along the width of the sign blank (i.e. the center of each hole shall be 6” from the left and 6” from the right edge), and the center of the holes shall be 1.5” from the top and bottom edges of the sign blank, respectively. • High Intensity Prismatic sheeting (ASTM Type IV) • 4-color designs (CMYK) • Artwork for sign face will be provided to the successful bidder in vector format (.pdf, .eps, or .ai) Bus Stop Signs – Type B • 12” x 24” pre-stenciled • 0.080” thick aluminum • Rounded corners, 1.5” radius • Two (2) mounting holes per sign blank. Holes must accept 5/16” threaded screws after trimming. Holes shall be centered along the width of the sign blank (i.e. the center of each hole shall be 6” from the left and 6” from the right edge), and the center of the holes shall be 1.5” from the top and bottom edges of the sign blank, respectively. • Non-reflective vinyl sheeting • 4-color designs (CMYK) • Artwork for sign face will be provided to the successful bidder in vector format (.pdf, .eps, or .ai)
