Conduct a kickoff meeting with City personnel. Review any available building drawings, previous environmental reports, or historical documentation. Prepare a site-specific inspection plan and schedule for City review. As a part of the visual asbestos survey, the Consultant shall: • Perform a non-destructive, visual inspection of accessible interior and exterior building materials to determine whether they are suspect ACM based on: o Age and construction era o Material type and appearance o Known common ACM uses (e.g., floor tiles, pipe insulation, plaster, cement board, mastics, ceiling tiles, roofing materials) • Document all suspect materials, including: o Material description and presumed ACM category o Estimated extent and location o Condition (good/fair/poor) o Friability (friable or non-friable) o Photographs o Notes regarding accessibility or limitations only and are not all inclusive. Drawings shown to illustrate the city’s desire. Exact parts needed, including make, model install method, etc, will be at the contractor’s discretion
