Specifications include, but are not limited to: Determine and complete all permits and approvals needed by MDOT for Bids and to start the construction. • Compile all historical information and reports needed for this project. • Total topographic survey of the project limits, at a minimum, to include ROW within project limits and 100’ beyond the POB and POE and side streets. An additional 10’ beyond ROW is also desired at driveways. • If Geotechnical subgrade investigation is needed, sampling shall meet the MDOT sampling frequencies for core/borings to a depth of 5’. • Coordinate with any and all utilities that may be affected by this project. • Complete all AutoCAD drawing and design work including locations of concrete patches joint and crack filling in the concrete layer.