Specifications include, but are not limited to: WHEELBASE AND GVWR Minimum wheelbase 142”. Minimum GVWR 11,400 lbs. ENGINE 1. Gasoline engine electronically controlled. Minimum 6.8L. 2. Oil Filter – shall be equipped with full-flow spin-on cartridge type with filter head mounted directly to engine block. Replaceable cartridge with minimum 1 quart capacity. 3. Air Filter – Dry element type with air restriction indicator. 4. Engine coolant recovery and de-aeration system must include some means for visual or electronic checking of coolant level without removing the tank cap or releasing pressure from the cooling system. Protection to -30 degrees F. 5. Fan drive shall be viscous on/off. 6. A light and buzzer warning system to notify the driver of low oil pressure and/or high coolant temperature. 7. Exhaust system shall be corrosion resistant muffler and exhaust pipe. TRANSMISSION 1. 10-Speed Automatic with auto torqshift-g and overdrive. AXLES/SUSPENSION 1. Front axle shall have a minimum of 5,990-lbs. capacity, with compatible springs for capacity and application. 2. Rear axle shall have a minimum of 7,230-lbs. capacity, with compatible springs for capacity and application. 3. 4-wheel drive with 3.73 Electronic-locking axles. 4. Shock absorbers shall be heavy-duty double acting, adequate number and size for axle load rating on both front and rear axles. 5. Power steering, for low effort steering. 6. Tires shall be LT275/70R18E tubeless radials, standard tread with reinforced sidewalls to resist curb damage. 7. Rims shall be 18, 8-hole hub piloted. 8. Manual locking hubs CAB 1. Regular 2 door cab. 1. heater, defroster, air-conditioning to have in dash controls, including fresh air vents. 2. AM/FM Clock Radio with scan/seek controls, antenna, and minimum two speakers (one each side). 3. Steering column shall be both telescoping and tilt. 4. Minimum 5 auxiliary switches. 5. Particulate air filter. 6. Rear view camera. 7. Remote keyless entry. 8. Power locks and windows.
