Chassis: 2025/26 F450/4500 Crew cab 4-door, 4x4, dual rear wheel, , Diesel engine with automatic transmission. Chassis includes electronic shift for 4x4 with the control in the cab. - GVWR: 18,000 lbs. Supply and install a 2.0” receiver hitch on the rear before the body is installed. Super Single Rear Wheel Conversion Kit: Supply and install a Super Single Rear Wheel conversion kit in place of the OEM front and rear wheels. The wheels will be shipped loose at delivery of the completed vehicle. The conversion kit will include: - (4) Rim Size: 19.5 Diameter / 8.25” - 11” Width - black - (4) Founders M/T Super Single Radial, 305/70R19.5 - 2 ½” lift kit – so tires clear front fender flares A black powder coated steel cab console will be installed between the front cab seats in place of the center ‘20’ seat. The console will include an angled panel close to the chassis dash for mounting the Whelen siren/light controller and customer supplied mobile radio. A horizontal panel will be located at the rear of the angled panel. - Filler panels as needed to complete the console - Face plate for a Whelen C399 controller - Face plate for a customer supplied mobile radio - (2) cup holders are included - (1) storage pocket: 3” x 7.25” wide x 6” deep included - (1) 12vdc power point One (1) NMO antenna mount will be installed on the cab roof with the coax cable routed to the cab console for the future installation of a mobile radio. One (1) Flexi whip antenna will be installed on the NMO mount for mobile radio use. Mount the Ford supplied trailer brake connection / wiring on the rear by the receiver. Mount the Ford supplied backup camera / wiring on the rear or supply and install a backup camera.
