Specifications include, but are not limited to: 1. REFERENCE RFP DOOR HARDWARE ANDACS COMPONENTS SCHEDULE FORREQUIREMENTS. SECURITY AND DOORHARDWARE ICONS ARE DIAGRAMMATIC -FIELD VERIFY 2. REMOVE, REPLACE OR ADD IP CAMREASAS INDICATED AND IN RFP CAMERASCHEDULE.. 3. PROVIDE AND INSTALL ALL SECURITYWIRING, CABLING, ACCESSORIES ANDASSOCIATED PATHWAY. 4. DEMO ALL EXISTING UNUSED SECURITYEQUIPMENT, CABLING AND WIRING. 5. FIELD COORDINATE ALL POWER, SPACEAND IT REQUIREMENTS WITH OWNER. 6. FIELD VERIFY AND COORDINATE ALLHEIGHTS AND FINAL LOCATIONS WITHOWNER/PSC. 7. VERIFY NEW FIRE PANEL (FIRE ALARMSYSTEM BY OTHERS) LOCATION FORMAGLOCK CONNECTIVITY 8. COORDINATE FINAL LOCATION OFINTERCOM CONSOLE(S) WITH OWNER; The Owner Site is an instructional and administrative facility that provides up to year-round services to their students, staff, and the community. As such, activities in all buildings are critical to the provisioning of services to the students, staff and the community and shall not be interrupted by the Contractor's Work activities. The successful bidder/Integrator (hereafter referred to as the Integrator) shall supply equipment, materials, labor, and services to provide the following systems including, but not limited to: 1. System(s) as indicated in each Section 2. Structured Cabling, Security Cabling and system wiring 3. Testing and test documentation as indicated in each Section. 4. Fire stopping. 5. Extended warranty and manufacturer’s certification of systems, products, and labor. Do not deliver or install interior equipment cable until spaces are enclosed and weather-tight, wet work in spaces is complete and dry, and work above ceilings in IT spaces is complete. B. This Integrator shall examine the conditions under which the system installation is to be performed and notify the Owner's Representative or Design Professional in writing of unsatisfactory conditions. Do not proceed with the work until unsatisfactory conditions have been corrected in a manner acceptable to provide a workmanlike installation.
