1. Carpet Specifications: shown in Exhibit A 2. Baseboard Specifications: shown in Exhibit B, if the product is discontinued, a comparable product must be used. 3. All floor preparation, including removal and disposal of existing flooring, cleaning of debris and scarification if necessary, will be the responsibility of the successful Respondent. 4. Carpet tile shall be glued in accordance with and using a recognized brand of adhesive recommended by the carpet manufacturer. The floor contains a Walker Duct Wire Management System and these areas MUST be adhered with a “releasable” adhesive. The Respondent shall specify the brand and type of glue to be used and shall provide a Safety Data Sheet (SDS) with the quote response. Installation shall lay flat and be free of bubbles and not move when subject to traffic. 5. Any carpet and vinyl wall base within the work area shall be included. 6. Material storage shall be the responsibility of the successful Respondent. There is limited, unsecured space to store the material on-site. 7. The flooring substrate is concrete. 8. It will be the responsibility of the Respondent to elevate and install beneath modular office systems and to move furniture as needed (i.e. conference tables, desks, file cabinets, seating, etc.) and move back/restore to original location furniture after installation is completed. 9. Owner will be responsible for disconnecting and re-connecting computers, phones and/or miscellaneous technology cabling. 10. It is the responsibility of the Respondent to obtain accurate measurements.
