Project specifications consist of: 1. Roof Replacement Remove all shingles, underlayment, and roofing accessories from entire house structure down to the roof deck. Inspect remaining roof deck for deterioration and or damage Replace roof deck as necessary. Provide a sq ft unit cost for deck repair/replacement. Install ice and water shield, which shall extend from the lowest edges of all roof surfaces to a point not less than 24-inches inside the exterior wall line of the building. Install 30-lb felt over remaining roof deck. Install all new drip edge on all edges. Install all new accessories and flashings to ensure a water shed installation. Install fiberglass, asphalt, 3-tab or architectural, class A shingles with a prorated 25/30-year warranty. Standard color and style to be selected by owner. Install appropriate roof venting. When possible, a continuous ridge vent will be installed over 30-lb felt with new drip edges on all edges. All work shall be in accordance with the applicable provisions of the 2015 Michigan Residential Code and the shingle manufacturers written specifications and details. Provide from the shingle manufacturer a standard roof system warranty upon completion. Leave rubber roof. Leave soffit and fascia, and do not disturb any paint. 2. Fire Alarm and Carbon Monoxide Detectors Install wireless smoke detectors and carbon monoxide detectors on each dwelling floor and in all bedrooms. If already existing, ensure they are functioning.
