Total permits to be printed 104,150 Item 1 – Nonresident Annual Motor Vehicle Permit Permits to be printed on .002 inch clear acetate with permanent adhesive on 55# paper protective covering. Adhesive to be permanent type. Fasson Acetate. Instructions for correct application to be printed on the protective covering in BLACK INK. PAPER – Permits to be 2.5” X 2.5” die cut with .125 radius corners. SECURITY CUT – Permits to have security die cuts to make them tear apart if attempted to be transferred. COLORS – Printing for each permit to be One PMS color and black. Electronic art file (PDF) to be furnished to successful bidder by the Michigan Department of Natural Resources, Parks and Recreation Division. Vendor is responsible for separations and color matching. Vendor shall submit color samples for final selection of colors and a pre-production sample of each permit to the Michigan Department of Natural Resources, Parks and Recreation Division before proceeding with the production run. Color should be ORANGE-166 PACKAGING & NUMBERING – Permits to be 1-up fan fold, perforated between permits, in groups of 50 left to right. Each Package to be individually shrink wrapped and numbered in exact sequence. Each bundle to start with last digit of 1. Example: 00001 thru 00050 Numbering shall include a 3 of 9 format barcode with readable number. Barcode shall be prefixed with 801. Example: 801-0000001. No dead numbers allowed. Multiple packs of permits to be packaged in cartons of measurements to contain 1,000 permits and the numerical sequence of the permits shall be in order. Each carton shall have the numbering of its contents printed on the outside end of the carton.
