Specifications include, but are not limited to: TROUSERS FOR PATROLMEN: Pockets: Two side, one fob, two hip finished 6-1/4 inches wide; outside measure 7-1/2 inches deep inside measure. Club pockets, 3-3/4 inches wide outside, 13 inches deep inside, 4-1/4 inches below right hip pocket. 1 inch back on side seam. Pistol pocket on left side below hip pocket, 5-3/4 inches wide outside unless otherwise specified 8 inches deep inside, 4-1/2 inches below hip pocket, 1 inch back side seam, 4 inches wide, 6 inches deep: pockets opposite lower edge of side pockets. Trousers to have 18 inch bottoms. 250 weight drill to be used in the linings and pockets. STRIPE: 1/2 of an inch copan blue cloth (piping) sewed securely in the outside seams, as far as bottom of side pockets. Bottoms gummed and felled, cloth heel stay. Trousers cut with waistband attached; Clasp on trousers instead of button in front through top. Suspender bottoms on bone-hand sewed; zippered fly; back buckle straps; and six belt loops. All pockets must be sewed to waistband seam; all pockets strongly bar tacked with silk. Pearl Satin waistband lining; drill pocketing. Seat seam to be sewed through tape. Graded 17 to 18-1/2 inches in width according to waist size. Reinforced stitching on seat and around pockets.