Specifications include, but are not limited to: Micro-surfacing is a tough and durable thin overlay material which can restore the original service properties to worn but structurally sound pavements. Its properties are based on a blend of select crushed aggregate and a sophisticated chemical formulation of asphalt cement, cationic emulsifiers, additives, and polymers. This specification covers all materials, equipment, construction and application procedures for rut filling and/or surfacing of existing paved surfaces. The micro-surfacing shall be a mixture of cationic, polymer-modified asphalt emulsion, mineral aggregate, mineral and field control additives, and water, properly proportioned, mixed and spread on the paved surface in accordance with this specification and as directed by the Engineer. This Work shall consist of furnishing and applying Micro-Surfacing as a pavement preservation. This specification shall consist of cleaning thoroughly, vegetation loose aggregate and soil, particularly soil that is bound to the surface. Work will not be done unless the road surface is dry. No work shall be done during rain or foggy periods or if the local forecast call for rain or fog on that day. No work shall be done if the ambient temperature is below 50 degrees Fahrenheit. The Contractor shall be responsible for scheduling the police detail and canceling it if not needed. Police details not cancelled shall be paid for by the Contractor.