Specifications include, but are not limited to: 1. Removal of all existing roofing and flashing membranes to the plywood deck surface. 2. Replacement of following flashing materials: step flashings, pipe flanges, perimeter drip edge material and all skylight flashing material. Install new vent flashing and wrap with ice and water shield including all valleys and around chimney and pipes. All materials to meet or exceed manufacturer's requirements. 3. Ice and water shield protection membrane shall extend up 6’ from the bottom edge of roof. 4. Installation of one layer of roofing underlayment on deck surface not covered with ice and water protection material. 5. Installation of new, architectural-style algae-resistant CertainTeed or equivalent 50-year shingles. Shingles will be installed in strict accordance with the manufacturer's specifications and shall be fastened using hot dipped galvanized nails.. 6. Color of roof shingles to be chosen by owner. 7. Installation of a shingle-over ridge vent. Vent in this area is continuous and will provide maximum intake ventilation for the full attic ventilation system. 8. Install new standard seamless white aluminum gutter over rear stairway (currently missing). 9. Replace the (2) existing skylights with a new Velux or equivalent venting skylight. 10. All grounds to be cleaned up on a daily basis. All bushes, shrubs, trees, and flowers to be protected. All roofing related rubbish to be removed from premises. Fire station will supply electrical power if needed. 11. Company will offer a 10-year Workmanship and Service warranty. This warranty is in addition to, but runs concurrently with any manufacturers’ warranties. It covers all service calls related to warranty replacement and/or installation issues for the first ten years after product installation. 12. Contractor to obtain all building/roofing permits needed.