The City may request pick-up services for certain vehicles needing repairs. Upon notification of a vehicle needing repair the contractor will pick up the vehicle. All City vehicles must be picked up and delivered by a flat bed tow truck or a tow truck. The contractor shall pick up the vehicle within one day of notification. Preventative Maintenance-Must utilize FleetioGo mobile application checklist Oil and Filter Changes, including fuel, hydraulic, etc. Tire Rotations Brake Inspections Engine Tune Ups Transmission and other driveline fluid replacement/flushing Starting/Charging system inspections Engine/Emission/Computerized Diagnostics Utilize OEM or approved equivalent scan tool and computer software to diagnose and repair all computerized systems on City vehicles. Program and update all computer modules Program keys Diagnose/Program TPMS systems Wiring repair as necessary Alignments/Steering and Suspension Computerized 2 or 4 wheel alignment Adjust camber and caster on all vehicles Check and adjust thrust angles. Complete Suspension repair and replacement Brakes Diagnose and repair all components related to hydraulic braking systems Diagnose and repair all components related to ABS and traction control systems Hybrid and Battery Electric Vehicles Diagnose and repair all components related to hybrid drive and battery electric drive systems on City vehicles. Hydraulic Systems Diagnose and repair all components related to hydraulic vehicle systems, including but not limited to repair and replacement of hydraulic cylinders, replacement of custom hoses/fittings, and rebuilding/replacement of hydraulic valves. Massachusetts State Inspections Bidder must be licensed by the State of Massachusetts to perform the annual MA Vehicle Check inspections. Equipment for General Repairs The shop shall have all required OEM or equivalent capable software and tools to diagnose and repair all systems within the City fleet. Current subscriptions to OEM’s such Ford, Cummins, International, Mack, as well as diagnostic systems such as Alldata, or Mitchell, to show the shop is up to date with technology. The shop should be equipped with a Computerized alignment system as well as all specialty tools required to perform the work within the scope of services. The shop must have the ability to utilize a mobile device, tablet, smartphone, etc. in order to capture relevant inspection data into the FleetioGo application.
