This project includes the demolition and removal of an existing playground fence and installation of both 8' and 4' fencing, along with access gates. 1. Demolish and remove existing chain link fence including any entangled vines and other organic matter. Existing fence is approx. 433LF of 8' galvanized chain link fence, 216LF of 4' galvanized chain link fence and (1) Double drive gate approx. 14' in width and 4' in height 2. Remove all existing concrete footings and haul to proper disposal site 3. Cut and clear any brush within 5' from edge of existing blacktop 4. Excavate and remove all stumps greater than 1.5" within 5' of blacktop edge. All stumps to be hauled away to proper disposal site 5. Supply and deliver soil to fill any holes created by excavation and demolition process to return to grade 6. Install 433LF of 8' Black PVC coated chain link fence. See areas marked on RED on map a. Chain Link Mesh to be 9GA 96" b. Top, Middle and Bottom rail to be 1-5/8" c. Line posts to be 2-7/8" set in concrete footing. Footing dimensions to be min 12" wide min 36" deep. Footing height to be set to accommodate 4" of loam to tie into existing grade d. Terminal, Corner and Gate posts to be 3-1/2" set in concrete footing. Footing dimensions to be min 18" wide and min 36" deep. Footing height to be set to accommodate 4" of loam to tie into existing grade 7. Install 216LF of 4' Black PVC coated chain link fence. See areas marked in YELLOW on map a. Chain Link mesh to be 9GA 48" b. Top, Middle and Bottom rail to be 1-5/8" c. Line posts to be 2-3/8" set in concrete footing. Footing dimensions to be min 12" wide min 36" deep. Footing height to be set to accommodate 4" of loam to tie into existing grade d. Terminal, Corner and Gate posts to be 2-7/8" set in concrete footing. Footing dimensions to be min 18" wide and min 36" deep. Footing height to be set to accommodate 4" of loam to tie into existing grade 8. Install the following gates marked in BLUE on map a. (1) Double Drive 4' high by 14' wide {opening) gate to accommodate vehicle entrance. Gate to include center drop rod, center latch and post mounted hinges b. (2) 4' high by 4' wide walk gates to accommodate both recess entrances. Gates to include post mounted hinges and one latch per gate.
