Specifications include, but are not limited to: System Components A. Hosted Security Management System (HSMS) a. Brivo Onair® i. Multi-tenant SaaS Physical Access Control System (PACS). ii. System requires no user-installed software. iii. System requires no dedicated on-site PC hardware. iv. System software requires no software maintenance. B. Security Door Controllers (SDC) a. Brivo ACS6000-E/ACS6008-E Door Control Panels: i. Expandable modular design. ii. Individually fused interface boards, locks, and REX devices. iii. Both optical and physical door tamper switches. iv. Power loss detection and automatic battery backup. C. Independent Edge Controller (IEC) a. Brivo ACS300-E Door Controller i. Built-in 802.3 Power over Ethernet(PoE+) 1. 2 Wiegand ports with 350mA fuse each 2. 1 RS485 port with 350mA fuse 3. 2 Wet Relays with 350mA fuse each ii. Compatible reader protocols include all Wiegand or HID formats up to 128 bits, iCLASS RS-232 and OSDP protocol over RS485 electrical interface. iii. Authentication and encryption of X.509 Digital Certificates and AES 256-bit encryption using TLS 1.2+. Ancillary Components a. Card Readers – Wiegand Interface: i. HID ii. XceedID iii. Farpointe b. Biometric Readers – Wiegand Interface: i. Suprema c. Card Readers – RS-485 Interface/OSDP: i. HID ii. Allegion/Schlage
