Specifications include, but are not limited to: Supply and deliver (FOB) one (1) Hobart, or equivalent, JetEx 6D, 28.5 VDC Engine Driven Ground Power Unit (GPU). Engine • Cummins QSB4.5 diesel engine operating at 1800 RPM • Turbocharged 4-stroke, inline 4 cylinder common rail fuel system • Full application approval by Cummins Engine Co., Inc. • 12 VDC battery system • Electronic governor system (via the engine’s ECM) • Intake manifold pre-heater for cold weather starting Engine Protection • Low oil pressure shutdown • High coolant temperature shutdown • Low coolant level shutdown • Intake air restriction indication Environmental • Relative Humidity: 10-95% • Operating Temperature: -25° F to +125° F (-31° C to + 52° C) • Relative humidity 0-100% non-condensing • No altitude derating required up to 10,000 feet, when running in normal operating range Performance • 28.5 volts DC output • 800 amperes continuous rating at 28.5 VDC • 2,000 amperes available for aircraft engine starting • Current limiting adjustable from 300 to 2,000 amperes • Line drop compensation assures proper voltage at aircraft plug Protective Finish • Preparation - Components are put through a 5 stage acid wash, rinse and sealer wash system • Primer Coat - Zinc rich primer which has been proven to handle 6000 hours of salt spray testing • Top Coat - Reliable anti-corrosive polyester powder provides excellent weather resistance, flexibility and adhesion, plus a strong resistance to chemical agents such as, diesel fuel, oils, glycol and de-icing fluids • Standard colors are high gloss white on sheet metal and a textured black frame and chassis • Custom colors are available and require a paint chip or color swatch sample for accurate color match Displays / Instrumentation Engine Operation • Meters: tachometer, coolant temperature, battery voltmeter, hour meter, oil pressure, fuel level • Buttons/Switches: Engine start, engine stop, engine idle/run, panel lights • Indicators: pre-heater, engine “ON”, air restriction Generator Output • Meters: ammeter, voltmeter • Switches/Adjustments: output contactor control, current limiting • Indicators: output contactor closed Codes: • MIL-STD-704 • ISO 6858 • Machinery Directive - 2006/42/EEC • Low Voltage Directive - 2006/95/EEC • EMC Directive - 2004/108/EC Options Desired: • Noise Reduction Kit • Low Fuel Warning • Unit Operating Beacon • 120 VAC, 60 Hz single phase generator • Block heater kit (120 V / 60 Hz or 240 V / 50 Hz) • Automatic towbar height stop • Cable tray rollers (shown in picture) • Spot light • Clearance Lights • Output Cable Interlock • Tie Down Rings • CE Marking/Certification
