Specifications include, but are not limited to: 1. GVW 24,000 lb. minimum. Chassis shall be of “Low Pro” or “Pro Loader” design. The exterior cab height shall not exceed 90”. 2. CA dimension shall be determined by bidder with utility body and Cab to accommodate specification described within for a safe and proper handling unit. 3. Front axle 8,500-lb. minimum with front gas shock absorbers and stabilizer bar. 4. The minimum rear axle shall be single speed 15,500 lb. - with rear gas shock absorbers and stabilizer bar. Rear axle ratio shall provide a minimum road speed of 65-68 MPH. 5. Engine shall be 6.7 Liter I-6 Turbo Diesel rated at 280 horsepower. Engine shall have factory block heater. 6. Engine shall have a high idle control switch mounted inside the cab to increase engine idle RPM when the vehicle is in park or neutral. Transmission shall be Allison® automatic transmission input torque of transmission shall meet or exceed the output torque of the engine. Transmission shall accommodate the GVW of the vehicle. Transmission shall have a heavy duty factory installed oil cooler and must have PTO provision. No Exceptions