Specifications include, but are not limited to: 3.2.1.1 Badge, A57DE or equal: Rhodium finish with red or blue enamel panels, custom die struck with: PRINCE GEORGE’S COUNTY panel, pin and safety catch, interior center circle to hold proper badge centers. Centers to be affixed with 60/40 solid solder. Material, 14 gauge (.064 thickness) 85/15 metal. Custom die struck design centers as follows: a. Round, 15-7/8” diameter, rhodium finish, 14 gauge metal, and rope edge. Hard enamel black background on top to read: FIRE FIGHTER. Prince George’s County Seal centered below panel with red enamel border. Red, blue and white enamel crest. b. Same as Item a. except, black enamel panel to read: FIRE TECHNICIAN. c. Same as Item a. except, black enamel panel to read: PARAMEDIC. d. Same as item a. except, black enamel panel to read: FF/MEDIC 3.2.1.2 Badge, A57DE or equal: Rhodium finish with red or blue enamel panels, screw back with interior circle to hold proper badge centers. Centers to be affixed with 60/40 solid solder. Material,14 gauge (.064 thickness) 85/15 metal. Custom die struck designs, same as Item 1, a through d. 3.2.1.3 Badge, A57DE or equal: Same as item 1, a through f except Rhodium finish plate added above PRINCE GEORGE’S on top of badge that reads, “RETIRED.” 3.2.1.4 Badge, A57DE or equal: Same as item 2 except Rhodium finish plate added above PRINCE GEORGE’S on top of badge that reads, “RETIRED.” 3.2.1.5 Badge, A57DE or equal: Gold finish with red or blue enamel panels, pin and safety catch with interior circle to hold proper badge centers. Centers to be affixed with 60/40 solid solder. Material, 14 gauge (.064 thickness) 85/15 metal. To include the following centers: a. Round disk, 7/8” diameter in gold finish, 14 gauge metal; pebble finish background, rope edge, single vertical bugle. b. Round disk, 7/8” diameter in gold finish, 14 gauge metal; pebble finish background, rope edge, two vertical bugles. c. Round disk, 7/8” diameter in gold finish, 14 gauge metal; pebble finish background, rope edge, two crossed bugles. d. Round disk, 7/8” diameter in gold finish, 14 gauge metal; pebble finish background, rope edge, three crossed bugles. Badge, rhodium, pin and safety catch 150 each Badge, rhodium, screw back 75 each Badge, rhodium, pin and safety catch 20 each Badge, rhodium, screw back 10 each Badge, gold, pin and safety catch 150 each Badge, gold, screwback 75 each