Specifications include, but are not limited to: A. Capacity: 750 Lbs. (340 kg) rated capacity. B. Mast Height: 1. Model GVL-EN-42; 45 inches (1143 mm) maximum lifting height. C. Nominal Clear Platform Dimensions: 1. Standard: 37-1/4 inches (947 mm) by 54 inches (1370 mm). D. Platform Configuration: 1. Straight Through Entry/Exit: Front and rear openings. E. Landing Openings: 1. Lower Landing: Door. 2. Upper Landing: Door. F. Doors and Gates: Doors and gates shall be self-closing type. 1. Door Height: Flush mount, 80 inches (2032 mm). 2. Door Construction: Aluminum frame with: a. Panels of 3/16 inch (5 mm) bronze or smoked grey Plexiglas with 16 gauge (1.5 mm) galvanized steel kick plate. b. D-Handle Pull: 12 inch (305 mm) offset D-Handle. G. Lift Components: 1. Machine Tower: Custom aluminum extrusion. 2. Base Frame: Structural steel. 3. Platform Side Wall Panels: 42-1/8 (1070 mm) inches high. 16 gauge (1.5 mm) galvanized steel sheet. Custom aluminum extrusion tubing frame. 4. Enclosure Panels: a. 3/16 inch (5 mm) bronze or smoked grey Plexiglas. H. Enclosure Height Above Upper landing: 1. Enclosure shall extend 83-3/4 inches (2127 mm) above the upper landing level. I. Base Mounting and Access to Lift at Lower Landing: 1. Floor Mount: Base of lift shall be mounted on the floor surface of the lower landing. For access onto the platform provide a ramp of 16 gauge (1.5 mm) galvanized steel sheet with a slip resistant surface. J. Options: 1. Enclosure Dome: Plexiglas type to cover top of lift enclosure. 2. Ventilation System: Two exhaust fans, thermostatically controlled with a 12 VDC battery backup. Requires continuous mains power for Hydraulic Drive. 3. Outdoor Protection: Lift shall include modifications recommended by manufacturer for reliable performance in outdoor climate of project site.