Specifications include, but are not limited to: 2.6.1 Approximately 300 repairmen require uniform sets with non-flame-resistant rating and enhanced visibility. 2.6.2 Uniform sets shall be 65% polyester and35% combed cotton 4.5 oz. material. 2.6.3 Shirts shall be navy blue with yellow and silver 2.5” trim for enhanced visibility around the body below pockets, around both sleeves, and across the back, shoulder to shoulder. Shirts shall have two pockets with through buttons or button flaps, lined two-piece collar and cuffs, and six button front with gripper at the neck. 2.6.4 Shirts shall be made available in short sleeve and long sleeve. 2.6.5 Shirts shall be delivered weekly, neatly pressed, and covered with clear plastic. 2.6.6 Pants shall be navy blue 7.5 oz. full cut, straight leg, no cuff, and have heavy duty brass zipper with button, bar tacks at the stress points, and four pockets (two front and two rear) with a through button or button flap on both rear pockets. Pants shall have at least seven heavy duty belt loops.