Specifications include, but are not limited to: A. Interested Consultants shall develop a team of professionals who are capable of offering all the variety of services defined herein. The County will not accept and will determine respondents who do not offer a comprehensive team as being non-responsive, nonresponsible to the RFP. Thus, yielding a rejected proposal. The team of professionals may be from various subcontractors or from within the same company. B. Projects assigned to the Consultant under this contract may include, yet not be limited to: I. Water Resources Engineering: Including hydraulic/hydrologic engineering using standard computation methodology and computer modeling. In accordance with, but not limited to, Washington County, MD, Natural Resource Conservation Service (NRCS), Maiyland Department of the Environment (MDE), Federal Emergency Management Agency (FEMA), and U.S. Army Corps of Engineers (ACOE) standards, policies, and procedures. Scope may include, but is not limited to, st01m drainage system design and evaluation, stormwater management best practices design, stream and floodplain routing/studies, stream restoration, waterway analysis to supp01i culvert and bridge design, watershed planning and analysis, evaluation of drainage complaints, development of sediment and erosion control measures, and other related activities. 2 Transportation and Highway Engineering: Including, but not limited to, planning studies, level-of-service and capacity calculations, roadway widening projects, new highway/roadway design, alignment studies, intersection improvements and traffic signalization, evaluation of safety complaints, pavement section design all in accordance with County, American Association of State Highway and Transpottation Officials (AASHTO) and Maiyland Depattment of Transportation State Highway Administration (MDOT SHA) standards and all other means necessaty. 3. Structural Engineering: Including, but not limited to, the design of structural repairs for bridges and buildings, design of new structures such as retaining walls, culvetts, bridges, buildings, catwalks, structural steel and wood structures, bridge and building inspections, bridge rating analysis, inspection, and evaluation of fixed facilities such as cranes, lifts, etc. and related activities. Structural inspections and evaluations of bridges, buildings, dams, physical plants, and equipment. All structural engineering shall be completed in accordance with professional engineering standards such as those published by the AASHTO, American Standards for Testing and Materials (ASTM), International Code Council (ICC), American Society of Civil Engineers (ASCE) and MDOT SHA standards and all other means necessaty. Structural calculations may be required in either Allowable Stress Design (ASD) or Load and resistance Factor Design (LRFD), as determined by the County