Specifications include, but are not limited to: The Contractor shall: A. Regularly and systematically examine, clean, lubricate, adjust and (when conditions warrant, or if directed by the Contract Monitor) repair or replace the following: 1. Elevator machines (traction and hydraulic) including all component parts. 2. Hoist cables, (hoist ropes), hoist belts, and governor cables (governor ropes). 3. Controllers, selectors, starter panels, dispatcher & relay panels, and signal components, including control and dispatching systems. 4. Car and hoistway door operating equipment complete. 5. Door operators and all associated components. 6. All component parts thereof, including but not limited to: a. Bearings, seals and housings b. Hangers and rollers with bearings and upthrust rollers c. Interlocks and all associated components d. Closers and all associated components e. Gibs f. Drive blocks and associated components g. Clutch or vanes and associated parts. h. Door safety edge, infrared edge, or light rays and associated components i. Gate switch and associated components j. Rushes, brush holder, commutators, and all associated components k. Machine and generator armatures and field coils