Specifications include, but are not limited to: Vendor to dig and install a 4 inch water line from existing 8
inch main at the Drivers Training Facility.
1.5.1 Vendor shall provide equipment, materials, operators, labor and supervision necessary to dig
and install a 4 inch water line from existing 8 inch main to the far side of the skid pad area.
1.5.2 Vendor shall install approximately 250 LF 4” DIP (Ductile Iron Pipe) Class 54 (Thickness) at a
depth of 4 feet.
1.5.3 Vendor shall install 8”x4” Tapping sleeve and valve to the existing 8” main.
1.5.4 Vendor shall install a 4 inch service valve to tie new pipe into existing pipe (sprinkler System).
1.5.5 Vendor shall cut 2 areas in the existing blacktop to lay/tie in pipe.
1.5.6 Vendor shall apply approximately 30 square yard of road patching to repair disturbed blacktop.
1.5.7 Vendor shall apply seed and mulch to areas disturbed installing the new water line.
1.5.8 Vendor shall perform this service between 7 am to 9 pm, Saturday / Sunday only.
1.5.9 Vendor shall not drive onto or over the surface of the skid pad. (** Special Attention**)
1.5.10 Vendor shall be responsible for any damages to State Property caused by the vendor during this service.