Specifications include, but are not limited to: 3.1 DIMENSIONS 3.1.1 GVWR – approximately 40,600 lbs. 3.1.2 Back of Cab to Axle (CA) approximately 102” (suitable for a 10-ft. dump body) 3.1.3 Wheelbase (WB) approximately 177" 3.1.4 Front Bumper to Back of Cab (BBC) approximately 107" 3.1.5 Integral frame – 120,000 PSI yield 3.1.6 Frame reinforcement with C-channel 3.1.7 Resisting Bending Movement (RBM) – 2,900,000 inch lbs. minimum 3.1.8 Frame extensions 3.1.8.1 Only if required by the body manufacturer 3.1.8.2 Huck bolted frame 3.2 BRAKE SYSTEM 3.2.1 Air system, S-cam-type brakes, front brakes shall be sized for maximum stopping power with fully loaded truck. 3.2.2 Dual air reserve tanks with dual gauges 3.2.3 Air compressor, TF550 or County-approved equivalent, 13.0 CFM 3.2.4 Air dryer, heated (unit shall be painted at factory, no undercoating shall be applied) 3.2.5 Moisture ejector, automatic 3.2.6 Front slack adjusters, or County-approved equivalents, automatic adjusting style 3.2.7 Rear slack adjusters, or County-approved equivalents, automatic adjusting style 3.3 ENGINE 3.3.1 Diesel, 370 gross hp, turbocharged, air to air intercooled, wet sleeve, approx.1,250 ft. lbs., gross torque @ 1,450 RPM (minimum) 3.3.2 Sump oil pan shall provide adequate snowplow hanger clearance. 3.3.3 Engine shall be most recent year EPA/GHG14 compliant and certified. Noncompliant certifications shall not be accepted. EPA Compliant Certification shall be provided with the Bid Response. 3.3.4 Five (5) year 100,000 mile warranty
