Specifications include, but are not limited to: THERMOPLASTICS LINE STRIPING MACHINE SPECIFICATIONS – This machine will be used to mark or replace pavement line stripes on roadways, crosswalks or where pavement markings are needed. Alkyd/Thermoplastic pavement marking machine. Must not need a preheat truck or any support device to operate. Needs to be self-operational/functional. Must have at least 100,000 BTU’s for melting material. Must have at least a 300-pound hopper chamber. Can be used and operated with our line driver system. Graco Line Driver, Series E08A WPR PSI/bar 2700/186hyd Honda CX160 5.5 Electronic Ignition Propane fuel source needed. Adjustable handlebars. Swivel wheel in the front of the machine. Have a Guide Rod. Have a raised hopper lid. Die heat system. External torch. Applications dies must be interchangeable from 4”, 5” and 12”. THERMOPLASTICS SCARIFIER SPECIFICATIONS – Pavement marking Scarifier for the removal of existing pavement markings. The Scarifier is used to remove existing worn and deteriorated pavement markings before new-renewed markings can be installed. This equipment is specifically designed to remove traffic paint, traffic tape and thermoplastic markings. Must have a minimum of 11-horse power gasoline engine. Must have swivel front mounted caster. Must have a depth control system. Must be compatible with our line driver system. Graco Line Driver, Series E08A WPR PSI/bar 2700/186hyd Honda CX160 5.5 Electronic Ignition Must have multiple cutter and drum options. Must come with a 10” fine finish flail drum cutter.
