Specifications include, but are not limited to: 1) All currently wired locations must continue to provide wired service. 2) The Aruba wireless network has 272 access points and 26 switches across all locations. 3) The Wi-Fi solution must be an on premise solution and not cloud-based solution. 4) Switch ports currently exist at each MDF/IDF hosting access points connected to Aruba switches. Replacement switches are needed that are equivalent to or better than the Cisco Catalyst 9300 Gigabyte switch, as we are upgrading all locations and the core to 10 Gigabyte POE+ switches. 5) Vendor is responsible for configuring all devices needed to implement the upgraded wireless network. PGCMLS technical staff shall be consulted prior to making any and all changes to any PGCMLS system. 6) The wireless network shall be configured to have multiple SSID’s on dedicated VLAN’s as defined by PGCMLS technology staff during installation and setup. Secure enterprise level authentication. 7) PGCMLS Staff will be responsible for installing any services needed on PGCMLS servers, and will be consulted prior to Vendor configuring those services. 8) The Vendor shall perform the physical installation of all equipment and provide the equipment (i.e. lifts and ladders) to complete the installation and contract. The vendor shall identify all subcontractors it will use on the project. 9) Vendor shall work with PGCMLS staff to configure a Guest VLAN and SSID that provides limited network access. 10) Vendor will configure monitoring alerts and usage reports.
