Specifications include, but are not limited to: 2.1 Building Size: Approximately 150 SF (10’x15’) 2.2 Color – selection from standard colors, colors will be selected at time of purchase per location 2.3 Roof 2.3.1 Metal panels – 24 gauge 2.3.2 Roof loads from 30 to 100 lbs ground snow load and wind loads from 70 to 150 mph. 2.3.3 ½” in 12”, up to 1” in 12” 2.3.4 Eave Height: 8’4” – 9’4” 2.3.5 Insulation 2.3.6 Gutters and downspouts are required 2.3.7 Roof pitch shall be either A-Frame or Single Slope Roof. 2.4 Structural 2.4.1 16 gauge covered 26-gauge galvanized panel 2.4.2 Headers – 26 gauge 2.4.3 Posts and purlins – 16 gauge 2.5 Wall Panels 2.5.1 Metal panels – 26 gauge 2.6 Floor 2.6.1 Floor system shall be pressure-treated lumber and galvanized metal. 2.6.2 Subfloor must be pressure-treated 2.7 Doors 2.7.1 Roll-up 2.7.1.1 Metal – 26-gauge pre-painted galvanized steel 2.7.1.2 Coil springs, brackets, door stops, slide latch, bottom bar with rubber astragal 2.7.1.3 Lockable 2.7.1.4 Color – selection from standard colors, colors will be selected at time of purchase per location 2.7.2 Additional standard man door 2.7.2.1 Metal – 26-gauge pre-painted galvanized steel 2.7.2.2 Lockable deadbolt and closer 2.7.2.3 Location to be selected by manufacturer and approved by HCPS 2.8 Anchor System – all four corners should have a bracket assembly that will be bolted to a ground rod, which needs to be supplied by vendor.
