• Furnish all material and labor to install 20’ wide x 6’ high Black Aluminum Slide Gate on the inside of stone wall. • Using existing 4” gate posts and one (1) new 4” SS-40 Black Counterbalance Post. • Extend the existing fence with new, out approx. 21’ for gate to slide to the right (if standing outside of stone wall). • Connect new fence extension back to existing 2 ½” fence post/line. • Approximately 60’ of new 6’ high 8 gauge All Black vinyl chain link fence. • 1 5/8” SS-20 Black Top Rail. • 2 ½” SS-20 Black Line Posts. • 3” SS-40 Black Terminal Posts. • All posts to be set in concrete approx. 10’ apart. • Can reuse approx. 30’ of existing black vinyl chain link fence. • 8 wheel trucks and bottom guides to be used. • Existing gates, fencing, etc. need to be removed, and disposed of by contractor. • Site visits can be made at any time. If assistance is needed, please contact Bill Fockler at 301-991- 5443. • Measurements are approximate.
