(a) The Contractor shall (within specified tolerances) perform all work in accordance with the lines, grades, typical cross sections, dimensions, and other data shown on the Plans or as modified by written orders including the furnishing of all materials, implements, machinery, equipment, tools, supplies, transportation, labor, and all other things necessary to the satisfactory prosecution and completion of the project in full compliance with the Contract requirements. (b) The documents composing the Contract Documents are intended to be complementary, and to describe the construction and completion of the work. Anything mentioned in the Specifications and not shown on the Contract drawings or shown on the Contract drawing and not mentioned in the Specifications, shall be of like effect as if it is shown or mentioned in both. (c) Omissions from the drawings or Specifications or the misdescription of details of work which are manifestly necessary to carry out the intent of the drawings and Specifications or which are customarily performed shall not relieve the Contractor from performing such omitted or misdescribed details of work, but they shall be performed as if fully and correctly set forth and described in the drawings and Specifications.
