25012 SNOWBLOWER, 8 HP, 26" CLEARING PATH, TECUMSEH 4-CYCLE ENGINE, ELECTRIC IGNITION, 5 FORWARD & 2 REVERSE SPEEDS, THROWS SNOW 40-45' ONLY TORO 38838 WILL BE CONSIDERED AT THIS TIME 10 EACH 25013 EDGER 3.5 HP BRIGGS I/C ENGINE, LOCKED CAST IRON CUTTER HEAD, DUAL DRIVE BELTS FOR NON-SLIP POWER TRANSMISSION TO THE BLADE, 3 QT FUEL TANK, HEAVYDUTY BLADE GUARD & MUD FLAP, CAN EDGE UP TO 4", REVERSIBLE 10" BLADE, 4 STEEL-HUBBED 8" WHEELS ONLY LITTLE WONDER MODEL 6033-00-01 WILL BE CONSIDERED AT THIS TIME 10 EACH 25014 MOWER LAWN ROTARY 4 CYCLE HEAVY DUTY SELF PROPELLED THE MOWER REQUIRED HEREIN SHALL BE THE LATEST MODEL UNITS AVAILABLE ENGINE SHALL BE AT LEAST 5 HP WITH OVERHEAD VALVE DESIGN 4 CYCLE EQUIPPED WITH RECOIL STARTER ELECTRONIC IGNITION CRANKCASE OIL DIPSTICK AND FLYWHEEL BRAKING SYSTEM FULLY PRESSURIZED LUBRICATION WITH REMOVABLE OIL FILTER CUTTER BLADE SHALL BE OF FLAT HARP HARDENED HIGH CARBON STEEL AT LEAST 3/16" THICK HEIGHT OF CUT SHALL BE ADJUSTABLE FROM 1/2" TO 3 1/2" HOUSING SHALL BE CONSTRUCTED OF DIE CAST ALUMINIUM DECK BUILT TO WITHSTAND SEVERE SHOCK AND ROUGH TREATMENT DECK SHALL ALSO HAVE REAR DISCHARGE WITH DISCHARGE CHUTE, NO BAG. UNIT SHALL PROVIDE CLOSE TRIMMING ON ALL 3 SIDES. ALL MOWER WHEELS SHALL BE EQUIPPED WITH GREASE ABLE ZERK FITTINGS FOR EASE OF MAINTENANCE FRONT WHEELS WILL BE 8" REAR DRIVE WHEELS SHALL BE A MINIMUM 8" AND SHALL BE CONSTRUCTED OF STEEL WITH RUBBER TIRE SELF PROPELLED TYPE FOR REAR DRIVE OVER ALL ENTIRE MOWER SHALL BE HEAVY DUTY CONSTRUCTION TO PERFORM COMMERCIAL WORK EQUIPMENT OFFERED SHALL MEET OR EXCEED ALL THE SPECIFICATIONS AS KAWASAKI 5 HP WITH PRESSURIZED LUBRICATION SYSTEM W/REMOVABLE OIL FILTER CARTRIDGE OR AS EXMARK METRO COMMERCIAL 21" MODEL ECSKA21 25 EACH 25015 MOWER MID SIZE COMMERCIAL WALK BEHIND, DECK SHALL BE A 48" CUTTING WIDTH WITH 3 BLADES AND SHALL BE CONSTRUCTED OF 10 GAUGE STEEL ONE PIECE WELDED DECK TRANSMISSION DRIVE 5 SPEED FORWARD 1 REVERSE TIRES SIZE 13 X 6.5 X 6 TURF TREAD WITH A 1" DIAMETER STEEL DRIVE AXLE ENGINE TO BE AIR COOLED GASOLINE 12 1/2 HP KAWASAKI SINGLE CYLINDER ENGINE EQUIPPED WITH PRESSURIZED LUBRICATION SYSTEMS AND REMOVABLE OIL FILTER CARTRIDGE FUEL TANK MUST BE AT LEAST 3 GALLON CAPACITY EQUIPMENT OFFERED SHALL MEET OR EXCEED ALL THE SPECIFICATIONS AS JOHN DEERE; RANSOMES; BOBCAT; EXMARK MG481KA483 4 EACH 25017 PLATFORM TO STAND ON FOR ITEM 25015 WALK BEHIND MOWER, VELKE EQUIPMENT OFFERED SHALL MEET OR EXCEED ALL THE SPECIFICATIONS AS VK200-2B 5 EACH 25019 HEDGE TRIMMER, GAS 30" ASSEMBLED, SINGLE SIDED 21.2 CC, DOUBLE RECIPROCATING CUTTER SEE-THROUGH FUEL TANK EQUIPMENT OFFERED SHALL MEET OR EXCEED ALL THE SPECIFICATIONS AS ECHO HCS-2810 10 EACH
