Specifications include, but are not limited to: Foundation: PC6300 Perma - Column bases along front & rear eaves PC6300 Perma - Column bases along left & right-side wall Exterior wall framing: 2x6 , 3-ply upper laminated columns, attached to Perma-Col. or brackets, 8’0” o/c, nailed and glued to engineer’s specs, along the side walls of the building 2x6 , 3-ply upper laminated columns, attached to Perma-Col. or brackets, 8’ o/c, nailed and glued to engineer’s specs, along the gable end walls of the building 2x8 pressure treated skirt board at grade and 2x6 treated wall plates between posts 2x4 SYP wall grits spaced every 2’0” o/c on outside of posts Roof framing: 4/12 pitch slope. Pre-engineered 1-ply trusses set on 8’0” center spacing Loading: 35 psf top chord live load, 5 psf top chord dead load, 5 psf bottom chord dead load T-Purlins 2x4-2x4 SYP between trusses, 2’0” o/c 12” overhangs the whole way around building 2x6 fascia board, 2x6 rake board