Specifications include, but are not limited to: Measurements/dimensions – Location 1) area to be milled and paved is on MD 350 at the VFW Post 2996 driveway entranceway at 35481 Mt. Hermon Road Pittsville, Maryland in Wicomico County and comprised of an area on the left side of approximately 38 feet in length x approximately 20 feet wide x 5 inches deep creating a patch that is the full width of entrance way from edge to edge. Measurements/dimensions – Location 2) area is the VFW Post 2996 driveway entranceway on the right side and comprised of approximately 36 feet in length x approximately 27 feet wide x 5 inches deep creating a patch that is the full width of the entranceway from edge to edge. Excavate out 5 inches and replace with 3 inches of base (12.5 mm) and 2 inches of top (9.5 mm) Superpave Mix with both patches making a smooth transition on both sides. Base must be tamped with a jack hammer. Crack seal pavement joints of new patch at site.