Specifications include, but are not limited to: 1 Six Cylinder, turbocharged, charge air cooled diesel engine and shall be designed and built by the manufacturer 2 * Engine shall be certified to Min. EPA Final Tier 4 emissions 3 Engine shall have a wet-sleeve cylinder liner design for improved cylinder cooling over dry sleeve and cast-in-bore design. 4 Engine displacement shall be no less than 6.6 liters 5 Engine net peak power shall be no less than 185 Hp. @ 1800 rpm With 64% Net Torque rise, Min. Net peak torque of 600Lb-ft @ 1300 RPM 6 Fuel system shall be high-pressure, common rail 7 Daily check points shall be accessible from one side of the engine and shall be done from ground level 8 Under-hood engine air cleaner shall be dry type, dual element with a restriction sensor and in-cab restriction warning light. Must not require tools to service 9 The loader will have pre-screened under hood air intake to minimize plugging 10 Access to engine will be open from both sides with side opening full access to coolers, radiator 11 Engine shall have 10-micron rated primary fuel filter with water separator 12 Loader shall be equipped with a heavy-duty steel fuel tank guard 13 Service interval for the engine oil and filter shall be Min. of 500 hours 14 The unit shall have an auto-idle, auto-shutdown feature for the engine. 15 The electrical system shall be 24 volt W/ batteries, min 950CCA with Min.130 amp alternator