Specifications include, but are not limited to: The purpose and intent of these specifications are to describe the furnishing and installation of a Right, Left or Double Down Pull Plow Gear System. The system shall be designed to hold the wing down and not allowing the wing to trip and hold it in place in snow banks. It must be professionally installed throughout to deliver dependable service under severe operating conditions, and optimum performance and production capabilities. To be installed on MaineDOT supplied 2020-2024 Fifty Four Thousand (54,000) GVWR, 6 x 4 Regular Cab Wheeler with Automatic Transmission, wheel base approximately 218” with a CA of approximately 132”. Price Quote #1 for installation of a Right-Hand Down Pull System set up with necessary hydraulics and controls to make it fully functional on tandem axle truck. Price Quote #2 for purchase of non-installed equipment only. Price Quote #3 for installation of a Left-Hand Down Pull System set up with necessary hydraulics and controls to make it fully functional on tandem axle trucks. Price Quote #4 for purchase of non-installed equipment only. Price Quote #5 for installation of a Double Pull Down system set up with necessary hydraulics and controls to make it fully functional on tandem axle trucks. Price Quote #6 for purchase of non-installed equipment only. (See Appendix C for Cost Response Sheet)