Specifications include, but are not limited to: he Crane shall be offered in a container handling configuration for spreader operations with the following maximum capacity and corresponding radius as measured from the center of the tower: Container Capacity: 41 metric tons at 101 feet (31 meters) Max Hook Load: 124 metric ton Max Working Radius 157 feet (48 meters) Primary Components: An elevated and enclosed cabin height of at least 23 meters. A boom pivot point on the tower of at least 16 meters. Cabin monitors indicating load under hook and the working radius. The crane shall have a lifetime classification for spreader operation of A7 for less than 50mt loads and A8 for less than 40mt loads. Computerized overload safety device (LMI). Compatibility with the available shore power; 400A-277/480V-3 phase 4 wire Appropriate lighting for night-time operation. Diesel powered prime mover in compliance with tier 4 emissions standards. A heated Diesel Exhaust Fluid (DEF) tank for operating in cold weather conditions. Engine must possess a block heater for optimal operation in cold weather conditions. Hydraulic oil, lube oil and diesel tank and fuel filter heaters must be included as standard equipment for optimal operation in cold weather conditions. Major machinery, wire rope drums and electrical control equipment must be located within weather resistant enclosures or cowlings. Lifting speeds of up to 120 meter/min. Crane shall be equipped to control acceleration/deceleration electronically to avoid shocks to boom structure, wire, and load.