Specifications include, but are not limited to: All qualifying equipment and software purchased resulting from this bid must include a one (1) year warranty. ➢ Annual maintenance for five (5) years, paid annually ➢ All parts, labor and travel included ➢ Same day response • Initial call back one (1) hour • Onsite four (4) hours ➢ Semi-annual preventive maintenance to be performed to include at a minimum: • Replace film feed belts if necessary, and lubricate all slide mechanisms • Replace vertical heat seal Teflon and silicone rubber backup if necessary • Replace perforator blade and silicone backup if necessary • Check all bearings and replace any that do not operate smoothly • Check chains and sprockets for proper tension or wear and replace if needed • Verify all areas of the machine are set back to the original manufacturer’s specifications • Check belt lagging on conveyor rollers for wear (replace if needed) • Check oil level in the gear boxes (add oil if needed) • Check sprockets for wear (replace if needed)