Mowing/Trimming Lawn areas shall be mowed and trimmed weekly (with exception of any “Special Requirements” defined below) and/or as needed throughout the growing season (May – October) to a uniform height not shorter than 3.5 inches and a max of 5 inches. (this level has good roots and no scalping, and no thicket masses when cutting). Use various mowing patterns to prevent ruts in the turf caused by mowers. All visible grass clippings and leaves after mowing shall be raked and bagged as needed and hauled away by the contractor; this will prevent thatch build up. All doorway entrances, walkways, parking lots and planting beds shall be vacuumed and/or blown free of debris and grass clippings accumulated as a result of mowing and/or trimming. All trash shall be picked up throughout the grass and planting areas. The Contractor will trim the inside and outside of the fence line perimeter and will keep clean of trash, vines and weeds. Also, a 3-foot swath shall be maintained along the outside of the fence as needed. Mower blades shall be kept sharp to prevent tearing of grass blades. Mulching and/or bagging type mowing equipment is mandatory on all mowers. Edging Edging shall be completed the same day and at the same frequency that the area is mowed. Use of an edger for hard surface edging to outline and/or remove turf from along all sidewalks and curbs to maintain straight and sharp edges. Use of a string trimmer to provide soft edging to outline and/or removing turf from all trees and planting beds, etc. to maintain the shape and configuration of all planting areas.
