Specifications include, but are not limited to: The project consists of constructing approximately 2.5 miles of road in the Western Region. A map of the geographic area (SHU) is shown in Appendix G. Prior to awarding a contract, the exact road location will be finalized. Road construction will be paid for at the per foot rate bid by the successful contractor(s). Stream crossings will be paid for at the per hour equipment rates bid by the successful contractor(s).The road is to be built primarily with an excavator and to a lesser extent bulldozer. An excavator weighing a minimum of 15 tons and a maximum of 36 tons and bulldozer weighing a minimum of 8 tons and a maximum of 21 tons are required to perform the work. The road bed is to be a minimum of 2 feet in height above the high side ditch bottom unless terrain makes it impossible, as approved by the Contract Administrator.