a. Tilting front Hitch, Set ahead on frame so the hood will open without tilting hitch. b. Hydraulic front post, bolted to Head Gear, completely welded( NOT ANGLED) c. Hydraulically detachable rear post and hydraulic push arms with 3 wheel stand with remote joystick control for removal d. 11’ Quick switch poly plow e. Seven gauge 12’ wing double cover blades wing quick-release program required. Hydraulically activated for shelving, remote joystick rear controls for ease of removing wing f. Hydraulic system to include variable displacement load sense pump with min. size 1310 series u-joints on pto shaft, six-section valves mounted in a stainless steel enclosure, must have relief valve junction blocks to ease removal of blade and wing g. Cirus Sander Controls with twin joysticks for functions ( Same as SPW #9) h. Stainless steel hydraulic piping to both front and rear w/SS fittings and couplers throughout i. Hydraulic couplers for all removable attachments to match SPW fleet j. Stainless Steel 40-gallon (min.) behind the cab style oil reservoir with low oil sensor shutdown. k. Plow and wing to have a combined maximum swath of 13’6” clearing path l. All body sub-frame, plow parts and associated hardware that are to be mounted on the frame or where metal to metal contact is apparent shall be primed and painted black prior to installation on the truck. No unprimed and painted steel parts will be accepted. This is required to minimize rust formation from wet salt and chlorides. No Exceptions
