Specifications include, but are not limited to: Deck Accessories (to be fabricated and installed by vendor) Build Transom Drop In Removable Door (Width 25” Height 27”, secure in place with angle Aluminum. Door made of 1/8” thick 5086 grade Aluminum w/ 25”x 1 1/2” diameter pipe welded on top horizontally for handle. Vertical storage slot for Transom door on aft port gunnel. 1 Clip/Latch top forward corner of door per Dive door to hold in closed position. Weld 2 aluminum tie up cleats (8”) on gunnel in front of cabin located midway b/w two railing posts 1 on each side. Main aluminum tie up cleat (12”) welded b/w Bow and windlass slightly off center. Removable aluminum dive ladder (4 steps), and 2 mounting sockets with rubber stoppers, port and starboard. Frame 3” square tubing with ¼” wall thickness, steps 1 ½” round tube with capped end. Total length: 5’. Steps: non-skid tape on each step. Recessed aluminum handles (6” x 6” w/ 1” bar in the middle) @ deck height, 2 per door excluding transom. Located main deck level on each side of Dive doors. Welded bow plate (Aluminum 5086 grade 3/8”x10”x6” with 2 bow eyes) marked on hull location for restraint to trailer