Specifications include, but are not limited to: 1.All placards are to be serialized. Vendor will contact Emergency Management for proper sequential numbering of placards prior to production.2.The permit number should begin with the Jefferson Parish initials (JP) followed by placard type, the year printed and the number sequence.3.The paper for the placards shall be 65lb Kan’t Kopy K1 (Security) blue cover protection clear kote, 7 X 10.4.Fade resistant litho inks.5.Placards are printed as follows:•Optima bold 48 pt. with 48 pt. leading between 2020 and 2021•Numbers are centered.•Number “2” measures 1.5” top to bottom.•Horizontal space between the 2020 and 2021 is no more than 2/8 of an inch.•Actual length of the four digit (2020) year is 1-1/2”•All 5 participating parish seals are to be on the placard without the sitting parish president’s name on the seals. •Placards will be placed on the dash board on the driver’s side of the vehicle•Placards are printed alike except for the permit numbers